Aluminized Telescope Mirror, and Rough Assembly

My mirror arrived back from the aluminizing service, 30 dollars was a steal! Mirror looks great.  I have also roughly assembled the telescope, though I haven’t got it quite working yet.  The mount needs some work, as well as the position of the mirror cell in the tube.

Telescope Mirror


Rough telescope assembly


down the tube with secondary


painted tube

painted tube

The white pain job makes for a nice, clean completed telescope.




















Fully Polished Mirror, and the Support

After 4 months of work, my telescope primary mirror is finished.  I started this project on the 18th of August and finished on December 31st, with a few hours to spare before the new year.  I thought that would be a goal, because I’m going to submit my work (a report basically) to win the National Young Astronomer Award, from the Astronomical League.

The winners (first, second, and third prize)  get an all expense paid trip to the ALCON (Astronomical League Convention) and of course the prize.  First place wins a five inch refractor telescope- a pretty good prize, see the details of this scope here.

Anyway, the telescope mirror is finished and that’s a huge part of the telescope.  For the reflective optical coating I chose Destiny.  My mirror will run a mere 30 dollars- after checking other companys, they averaged about 50 dollars for a mirror of this size.  I also bought a secondary mirror and spider for a small sum.  1/10th wave optics, 1 inch size, 15 bucks is pretty hard to beat.

Upon finishing my mirror, I counted up all the time working on my mirror, from start to finish.  Total time of the glass in motion was over 25 hours!  It may seem like not that long, but it feels longer because of the precision I had to maintain during the process.  Total polishing time clocked in at 6.7 hours- a little longer than expected.  But it’s rouge, one of the slowest polishing compounds you can buy.  And it was worth it considering that it is said to give a finer polish than Cerium Oxide, which is also three times the polish.  Oxide polishes faster, but the increased price was not worth it to me.

Finished Mirror

For me, one of the most important parts of the telescope making project is putting your initials and the date you finished it on the back of the mirror.  It was just as exciting as I thought it would be.  It may seem insignificant, but I liked doing it.


Also completed was the mirror support, or cell.  It consists of two circular pieces of wood, one the size of the mirror and one the size of the telescope tube.  The mirror sits on the upper piece, and is secured with “L” shaped clamps.  In between the pieces are 3 long screws, and attached are 3 springs.  Next comes the wooden piece for the tube.  Under that, the the ends of the screws are exposed, and wing-nuts are then threaded on.  By twisting on of the wing-nuts, it compresses the spring and moves the mirror on top slightly downward on that side of the mount.

IMG_3210 IMG_3209

mirror in the support

Pretty good huh? I bought an aluminum tube at the hardware store for 7 dollars.  It is five inches round, so the bottom piece of the support matches that.  Obviously, the “L” clips will need to be painted black and other stuff to eliminate reflections.  There’s not that much left to do on the scope really.  I had the bottom base for the Dobsonian mount finished- with a CD as the bearing material, which works really good by the way.

I'm building a mount similar to this.

I’m building a mount similar to this.

Well to wrap things up, I finished a big important part of my telescope and I’m glad I took my time with it.  Pretty soon I’ll be gazing upon galaxies and nebulae.  I think the biggest help will be the aperture.  If you’ve heard great things from Orion’s Skyscanner, my scope has the same aperture.  It also has a much longer focal length (f-12) and should, if collimated correctly, provide sharper images.